Your browser does not support JavaScript!

Author: Tronserve admin

Thursday 5th August 2021 02:51 AM

Japan To Send Robots to Moon and Remote Control Them to Build Lunar Base


image cap
147 Views

The Japanese Aerospace and Exploration Agency is planning to send robots to the moon and remote-control them to build a lunar base.

 

Jaxa is partnering with Kajima Corporation, one of Japans earliest and biggest construction companies, to promote research and development on the remote construction system by coordination of remote and automatic control.

 

The project got started in 2016 with the participation of educational establishments including Shibaura Institute of Technology, the University of Electro-Communications and Kyoto University.

 

Tests have currently been conducted at the Kajima Seisho Experiment Site of “two kinds of automated construction functionality ”, which have “ Produced some results," says Jaxa.

 

Jaxa says remote control is “ a possible method to build a human base off of Earth, on the moon and Mars in the future."

 

The delay in providing any command to construction machinery from Earth has been an issue, however, along with other problems, such as productivity and efficiency, says Jaxa.

 

On Earth, too, the same technologies are in need to deal with a predicted shortage of adept human resources in the construction industry, which has conventionally been human labor oriented.

 

The answer might be what is described as a “ Construction production system to automate machinery," developed by Kajima, called “A4CSEL”, which has been in development since 2015.

 

His current research of the five groups – Jaxa, Kajima, and three universities – is targeted at establishing A4CSEL as the method to recognize the remote construction functionality in space by coordination of remote and automatic control.

 

Jaxa says the remote, autonomous control system to develop a human lunar base will want the following four steps:

 

Site preparation work for the module for human habitation;

Excavation that meets the required depth;

Installation of the module; and

Shielding the module with the surface material to protect it from meteoroids and radiation.

 

A seven-ton class earth mover has been altered with onboard survey instruments and an automatic operation control console.

 

The instruments that the tractor and backhoe are installed with autonomously measure the position and direction of its own, making it both remotely and automatically operable.

 

In addition to full automation, the research is fashioned to get the following to establish remote construction functionality by coordination of remote and automatic control:

 

Operational support to compensate for delays: remote control functionality that could compensate for considerable communication delays for 3 to 8 seconds without undermining the operation and stability of the remotely controlled machinery;

Motion recognition that adapts to environment: autonomous operation that opts for plausible solution in variable space topography due to communication delays; and

Coordination of multiple construction machines: interference avoidance that facilitates synchronization of several operations.

Various commands have been executed – the routine operation is repeated, driving over specified distances is automated, and operations requiring fine-tuning are controlled remotely.

 

The operational process has shown the feasibility of the unmanned technologies to build a lunar base.

 

Research and development continue to advance the obtained results and to increase the functions and performance of the system.

 

In the future, says Jaxa, practical technologies are to be sought for to estimate the position on the Moon and Mars where Global Navigation Satellite System is unavailable, and to precisely recognize and navigate terrains, and to ensure the system stability in the uncertain cosmic communication environment.




This article is originally posted on robotics&automation.com


Share this post:


This is the old design: Please remove this section after work on the functionalities for new design

Posted on : Thursday 5th August 2021 02:51 AM

Japan To Send Robots to Moon and Remote Control Them to Build Lunar Base


none
Posted by  Tronserve admin
image cap

The Japanese Aerospace and Exploration Agency is planning to send robots to the moon and remote-control them to build a lunar base.

 

Jaxa is partnering with Kajima Corporation, one of Japans earliest and biggest construction companies, to promote research and development on the remote construction system by coordination of remote and automatic control.

 

The project got started in 2016 with the participation of educational establishments including Shibaura Institute of Technology, the University of Electro-Communications and Kyoto University.

 

Tests have currently been conducted at the Kajima Seisho Experiment Site of “two kinds of automated construction functionality ”, which have “ Produced some results," says Jaxa.

 

Jaxa says remote control is “ a possible method to build a human base off of Earth, on the moon and Mars in the future."

 

The delay in providing any command to construction machinery from Earth has been an issue, however, along with other problems, such as productivity and efficiency, says Jaxa.

 

On Earth, too, the same technologies are in need to deal with a predicted shortage of adept human resources in the construction industry, which has conventionally been human labor oriented.

 

The answer might be what is described as a “ Construction production system to automate machinery," developed by Kajima, called “A4CSEL”, which has been in development since 2015.

 

His current research of the five groups – Jaxa, Kajima, and three universities – is targeted at establishing A4CSEL as the method to recognize the remote construction functionality in space by coordination of remote and automatic control.

 

Jaxa says the remote, autonomous control system to develop a human lunar base will want the following four steps:

 

Site preparation work for the module for human habitation;

Excavation that meets the required depth;

Installation of the module; and

Shielding the module with the surface material to protect it from meteoroids and radiation.

 

A seven-ton class earth mover has been altered with onboard survey instruments and an automatic operation control console.

 

The instruments that the tractor and backhoe are installed with autonomously measure the position and direction of its own, making it both remotely and automatically operable.

 

In addition to full automation, the research is fashioned to get the following to establish remote construction functionality by coordination of remote and automatic control:

 

Operational support to compensate for delays: remote control functionality that could compensate for considerable communication delays for 3 to 8 seconds without undermining the operation and stability of the remotely controlled machinery;

Motion recognition that adapts to environment: autonomous operation that opts for plausible solution in variable space topography due to communication delays; and

Coordination of multiple construction machines: interference avoidance that facilitates synchronization of several operations.

Various commands have been executed – the routine operation is repeated, driving over specified distances is automated, and operations requiring fine-tuning are controlled remotely.

 

The operational process has shown the feasibility of the unmanned technologies to build a lunar base.

 

Research and development continue to advance the obtained results and to increase the functions and performance of the system.

 

In the future, says Jaxa, practical technologies are to be sought for to estimate the position on the Moon and Mars where Global Navigation Satellite System is unavailable, and to precisely recognize and navigate terrains, and to ensure the system stability in the uncertain cosmic communication environment.




This article is originally posted on robotics&automation.com

Tags:
robots to moon control from earth